精易论坛

标题: 有没有驱动读写的教程 [打印本页]

作者: 愤怒的Rabbit 时间: 2024-12-4 15:21
标题: 有没有驱动读写的教程
驱动方面，完全零基础。一直想学习驱动读写，网上教程也很多，但是网上教程百花齐放。
每个都不一样，这个看看，那个看看，最后感觉自己不知道看了个啥....
特来求助论坛各位大佬，给点零基础能看得懂的吧

作者: 愤怒的Rabbit 时间: 2024-12-4 15:27
感觉会驱动的人好多，都哪里看得教程啊

作者: hongqingfeng 时间: 2024-12-4 15:27

愤怒的Rabbit 发表于 2024-12-4 15:27
感觉会驱动的人好多，都哪里看得教程啊

哔哩哔哩，要么自己线下报班

作者: 愤怒的Rabbit 时间: 2024-12-4 15:31

hongqingfeng 发表于 2024-12-4 15:27
哔哩哔哩，要么自己线下报班

bilibili太多了，有的讲的很精简，但有的讲的又过于啰嗦，不知道看哪种好

作者: hongqingfeng 时间: 2024-12-4 15:34

愤怒的Rabbit 发表于 2024-12-4 15:31
bilibili太多了，有的讲的很精简，但有的讲的又过于啰嗦，不知道看哪种好

见仁见智，不好评判

作者: 承易 时间: 2025-3-19 22:33
#include <ntddk.h>

#define DEVICE_NAME L"\\Device\\MyDevice"
#define SYMBOLIC_LINK_NAME L"\\DosDevices\\MyDevice"

UNICODE_STRING DeviceName;
UNICODE_STRING SymbolicLinkName;
PDEVICE_OBJECT DeviceObject;

NTSTATUS CreateClose(PDEVICE_OBJECT DeviceObject, PIRP Irp) {
Irp->IoStatus.Status = STATUS_SUCCESS;
Irp->IoStatus.Information = 0;
IoCompleteRequest(Irp, IO_NO_INCREMENT);
return STATUS_SUCCESS;
}

NTSTATUS ReadWrite(PDEVICE_OBJECT DeviceObject, PIRP Irp) {
PIO_STACK_LOCATION stack = IoGetCurrentIrpStackLocation(Irp);
PVOID buffer = Irp->AssociatedIrp.SystemBuffer;
ULONG length = stack->Parameters.Read.Length;

// 这里可以添加读写逻辑
DbgPrint("Read/Write operation: %lu bytes\n", length);

Irp->IoStatus.Status = STATUS_SUCCESS;
Irp->IoStatus.Information = length;
IoCompleteRequest(Irp, IO_NO_INCREMENT);
return STATUS_SUCCESS;
}

void UnloadDriver(PDRIVER_OBJECT DriverObject) {
IoDeleteSymbolicLink(&SymbolicLinkName);
IoDeleteDevice(DriverObject->DeviceObject);
DbgPrint("Driver unloaded\n");
}

extern "C" NTSTATUS DriverEntry(PDRIVER_OBJECT DriverObject, PUNICODE_STRING RegistryPath) {
RtlInitUnicodeString(&DeviceName, DEVICE_NAME);
RtlInitUnicodeString(&SymbolicLinkName, SYMBOLIC_LINK_NAME);

IoCreateDevice(DriverObject, 0, &DeviceName, FILE_DEVICE_UNKNOWN, 0, FALSE, &DeviceObject);
IoCreateSymbolicLink(&SymbolicLinkName, &DeviceName);

DriverObject->MajorFunction[IRP_MJ_CREATE] = CreateClose;
DriverObject->MajorFunction[IRP_MJ_CLOSE] = CreateClose;
DriverObject->MajorFunction[IRP_MJ_READ] = ReadWrite;
DriverObject->MajorFunction[IRP_MJ_WRITE] = ReadWrite;
DriverObject->DriverUnload = UnloadDriver;

DbgPrint("Driver loaded\n");
return STATUS_SUCCESS;
}

#include <windows.h>
#include <stdio.h>

#define DEVICE_NAME "\\\\.\\MyDevice"

int main() {
HANDLE hDevice = CreateFile(DEVICE_NAME, GENERIC_READ | GENERIC_WRITE, 0, NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);
if (hDevice == INVALID_HANDLE_VALUE) {
      printf("Failed to open device\n");
      return 1;
}

char buffer[100];
DWORD bytesRead;

if (ReadFile(hDevice, buffer, sizeof(buffer), &bytesRead, NULL)) {
      printf("Read %lu bytes: %s\n", bytesRead, buffer);
} else {
      printf("Failed to read from device\n");
}

char writeBuffer[] = "Hello from user mode!";
DWORD bytesWritten;

if (WriteFile(hDevice, writeBuffer, sizeof(writeBuffer), &bytesWritten, NULL)) {
      printf("Wrote %lu bytes\n", bytesWritten);
} else {
      printf("Failed to write to device\n");
}

CloseHandle(hDevice);
return 0;
}

去问AI 那是现在最好的老师

欢迎光临精易论坛 (https://125.confly.eu.org/)